Add to Cart:

Dulux Weathershield 5L ACRYLIC EXTERIOR WALL FINISH

RM160.70

  • Model: Dulux Weathershield 5L
  • Shipping Weight: 8Kgs
  • Manufactured by: ICI DULUX


Dulux Weathershield Acrylic Exterior Wall Finish is a premium quality, 100% acrylic based emulsion paint.

USAGE
Dulux Weathershield Acrylic Exterior Wall Finish is suitable for new or previously painted exterior masonry surface such as brickwork, plaster, cement, rendering, and asbestos.

BENEFITS
Excellent alkali resistance and adhesion properties.
Excellent exterior durability and colour fastness.
Consists of dirt resistant property which enables the finish to stay clean and brighter longer.
Protection of at least 5 years against fungus and algae growth.
Colour lock technology ensures that the colours on exterior walls stay looking new for longer.
Meets Malaysian Standard MS 134: 1989

PERFORMANCE GUIDE
FILM PROPERTIES
Water Resistance

Resistant to mild atmospheric fume attack and to the salts in new mortar, rendering and similar surfaces.
Resistant to the levels of atmospheric humidity normally experienced in exterior environment.

THEORECTICAL COVERAGE
The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surfaces of average porosity 12 - 13 m/litre.
PRODUCT DATA
COMPOSITION
(nominal)

Pigment : Lightfast Non-Lead Pigments and Mineral Extenders.
Blinder : Acrylic Emulsion.
Solvent : Water

VOLUME SOLIDS
White 40% (nominal), other colours will vary.
APPLICATION
THINNING
Brush or Roller



Conventional Spray
Airless Spray

For sealing new or bare surfaces, thin with up to 1 part of clean water to 10 parts of paint (10%).
For normal use, thinning is usually not necessary.
Add up to 1 part of clean water to 3 parts of paint (30%).
Ready to use. Thinning is usually not required.

SPRAY RECOMMENDATIONS
Conventional Spray
Airless Spray


Satisfactory through most equipment.
A typical set up for airless spray application would be a minimum working pressure on paint of 140Kg/cm (2000 lb/sq in) with a spray tip size 0.58mm (23 thou) and a spray tip angle 65
DRYING TIMES
Touch Dry
Recoat
Single coat at standard thickness:
Dependant on temperature and humidity.
2 - 3 hours.
CLEANING UP
Clean all equipment with clean water immediately after use.



This product was added to our catalog on Tuesday 20 January, 2009.

Your IP Address is: 54.85.162.213
Template designed by Amazone.com.my. Copyright © 2019 Antara Hardware Home Centre Sdn Bhd (D&B D.U.N.S # 86-58-6574) (Co Reg# 722880-T) (GST Reg # 000646324224). Powered by Zen Cart.