Add to Cart:

Dulux Gloss Finish 5L(Solventborne) SMOOTH MIRROR-LIKE F

RM171.80

  • Model: Dulux Gloss Finish 5L
  • Shipping Weight: 6.5Kgs
  • Manufactured by: ICI DULUX


Dulux Gloss Finish is a premium solvent based high gloss finish that gives a smooth mirror like finish.

USAGE
Suitable for use on all types of interior and exterior wood and metal and suitable primed masonry surfaces.

BENEFITS
High gloss and excellent gloss retention.
Good brush loading and good sag resistance.
Excellent colour fastness.
Lead-free formulation:- Non toxic.
Excellent durability and fungus resistance.
Meets Malaysian Standards MS 125:1995

PERFORMANCE GUIDE
FILM PROPERTIES
Chemical Resistance

Heat resistance
Water Resistance

Resistant to mild chemical fume attack but where there is heavy attack, e.g. actual contact with chemicals, specialist paint systems will be required.
Generally resistant to heat up to 90C, but some discolouration of light colours may occur at temperatures above 80C.

Resistant to the levels of atmospheric humidity present in normal interior and exterior environments and will withstand repeated washing. Not suitable for use on immersed surfaces.

THEORECTICAL COVERAGE
A guide to the theoretical coverage which can be achieved under normal conditions is 16 - 18 m/L.
PRODUCT DATA
COMPOSITION
(nominal)

Pigment : Lightfast Non-Lead Pigments.
Blinder : Alkyd.
Solvent : White Spirit.

VOLUME SOLIDS
White 55% (nominal), other colours will vary.
FLASH POINT
32C - 55C.
APPLICATION
THINNING
Brush or Roller


Conventional Spray
Airless Spray

For normal use thinning is usually not necessary, but if required add up to 1 part of Dulux Thinner 850 - 41 or white spirit to 10 parts of paint (10%).
Add up to 1 part of Dulux Thinner 850 - 41 or white spirit to 3 parts of paint (30%).
Ready for use.
SPRAY RECOMMENDATIONS
Conventional Spray
Airless Spray


Satisfactory through most equipment.
A typical set up for airless spray application is a minimum working pressure on paint of 140 kg/cm (2000 lb/sq in) with a spray tip size 0.38mm (15 thou) and a spray tip angle of 65C
DRYING TIMES
Touch Dry
Recoat

Single coat at standard thickness:
2 - 4 hours.
5 - 6 hours.

FILM THICKNESS

Wet: 55 micro - metres.
Dry: 30 micro - metres.

CLEANING UP

Clean all equipment with Dulux Thinner 850 - 41 immediately after use.


Application Method65 spraying tip1-2 hours drying timePractice proper cleaning
PRE - APPLICATION
SURFACE PREPARATION
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below).
SYSTEM INFORMATION
Wood


Metal


Masonry
PRIMER (1 COAT)

Dulux Aluminium Wood Primer Sealer (A519 - 3697)
Dulux Grey Green Zinc Phosphate Primer (A500 - 388)
Dulux Alkali Resisting Interior Wall Sealer (A931 - 18380)
Dulux Weathershield Sealer (A931 - 18177)
UNDERCOAT(1 COAT)




Dulux Speed Undercoat (A545 - 101)
FINISH(2 COATS)




Dulux Gloss Finish (A365)

Note: Do not apply Dulux Gloss Finish on fresh or damp masonry as it will normally cause the paint to saponify.

Use abrasive paperDust offSeal a coat with primer
PRECAUTION
SAFETY, HEALTHY AND ENVIRONMENTAL INFORMATION

FLAMMABLE
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Repeated exposure may cause skin dryness or cracking.
Contains: ETHYL METHYL KETOXIME, COBALT CARBOXYLATE. May produce an allergic reaction.
Avoid contact with skin.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
To remove splashes of paint from skin, use soap and water or a recognised cleanser.
If swallowed seek medical advice immediately and show this container or label.
Keep away from food, drinks, animal feed and out of the reach of children.
Keep away from combustible material.
Container must be stored in a cool and shaded place.
It must be tightly closed in a secure, upright position.
Work in a well-ventilated area and do not breathe in vapour or spray.
A suitable mask should be worn during sanding.
When applying paint, it is advisable to wear eye protection and suitable gloves.
In case of fire use foam, dry powder, AFFF, CO2 - Never use water.
In case of a spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or the environment.
Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations.
Refer to Dulux Product Safety Data Sheet for further details.
In case of emergency, refer to Emergency Incident Response Hotline 1800 80 6187.


Keep seal tightStore in cool placeSecure uprightWear proper protectionEnsure good ventilationPractice proper disposalWear proper protection

This product was added to our catalog on Tuesday 20 January, 2009.

Your IP Address is: 18.232.99.123
Template designed by Amazone.com.my. Copyright © 2019 Antara Hardware Home Centre Sdn Bhd (D&B D.U.N.S # 86-58-6574) (Co Reg# 722880-T) (GST Reg # 000646324224). Powered by Zen Cart.