U-POL Fibral 200ml (Glass Fiber Repair Paste)
U-POL Fibral is a short strand fiber glass putty used for bridging holes in steel and fiber glass panels. U-POL Fibral putty forms a hard durable surface, however its short strand formulation enable it to be easily applied and sanded. U-POL FIBRAL has been specially formulated for the professional it can be top coated with putty or directly top coated with paint.
Features
-
Fibral polyester glass-fibre filler is a two-component chemical paste used for the bridging of holes and rust in surfaces such as bare steel.
-
Smooth spreading strong 2K polyester repair paste
-
Ideal for bridging holes, provides tough resistant GRP coating
-
Supplied with a suitable hardener
-
Fiber enhanced & waterproof
-
Available in 200ml and 1 liter
-
Forms a very hard, durable surface.
-
Can be sanded and shaped if required.
-
Easily covered with standard polyester filler or can be over-painted directly.
Specifications:
-
U-POL Fibral is rapid curing and non shrinking once mixed, 4-5 mins. at 70ºF with 5% hardener.
-
Sandable after 20 mins. at 70ºF.
-
Begin sanding with 80 grit paper using finer grades to finish such as 120 the220 grit, for rotary sanding equipment a hard back plate is recommended.
-
Hand sanding can be done wet or dry.
-
U-POL Fibral can be top-coated with most paint systems.
P/S :Extra hardener available for purchase.
This product was added to our catalog on Tuesday 19 August, 2014.
