Add to Cart:

Autopot 4Pot System (Autopot Hydroponic 4 Pot System with 1 47 l

RM625.00

  • Model: 4POT/PACK/1
  • Shipping Weight: 7Kgs
  • Manufactured by: AutoPot UK


Autopot 4Pot System (Autopot Hydroponic 4 Pot System with 1 47 liters Tank) 

 

Features

Easy to assembly and low maintenance results in successful growing.

 

Minimal monitoring required.

 

Just add plant water and soil (growing media according to instruction :soil and perlite mix, soil and clay pebbles mix, coco and perlite mix, coco and clay pebbles mix)

 

Ready mixed pH buffered, no hurdles starter nutrient, just add water to dilute Growth Technology IONIC

Hydro nutrient for plant growth stage and bloom stage cycle. Mineral and trace mineral nutrient that will fully dissolved in water and would not block the Autopot pipeline and AQUAvalve.

  • The 4-Pot System is a gravity fed watering system which requires no power, pumps or timers to operate. It is extremely versatile and caters for gardeners and growers of all abilities guaranteeing great results. The system can easily be extended so many pots can be linked to a single reservoir. Once set up and the reservoir is filled with water & liquid feed, this adaptable, unfailing system will completely take care of all your plants needs with minimal monitoring.

    How to Pot up an AutoPot Pot
    1.The Root Control Discs (RCD) and Matrix Discs work in the following configurations:
    A Black Matrix Disc in the pot, RCD in tray gold face up
    B RCD in pot gold face down
    C RCD in pot gold face down and RCD in tray gold face up

    2.Fill the bottom of the pot 1-2" (2.5-5cm) NO HIGHER with either, washed pH stable Clay Pebbles / GrowStones /Perlite size 3 / washed pea gravel. If
    using AirDomes firstly place the AirDome on the Root Control Disc, then fill with either Clay Pebbles / GrowStones /Perlite to the height of the AirDome.
    NB: Please ensure that if Clay Pebbles are used that they are pH stable or are fully stabilised for at least 48 hours prior to use.

    3.The choice of substrates and blends of substrates with AutoPot is endless, the following are good guidelines and have been trailed and tested, Coco / Perlite,
    Coco / Clay Pebbles, Soil /Perlite, Soil /Clay Pebbles, Rockwool / Clay Pebbles. Which ever blends you decide to use please ensure that there is good air
    retention and capillary action. Always use reputable brands. Simply place your choice of substrates in the pot to 1-2" (2.5-5cm) below the top.

    4. Always ensure that an established plant is used when potting up, pot up as you would any other pot, then water each pot through outside the tray, when you see
    water draining from the bottom of the pot, Stop. Allow the pot to drain for 15 mins.

    5. Once the pots have drained wipe the bottom and sides of each pot to remove any substrate that may be stuck to it and place into the AutoPot tray.

    6. At this point the system SHOULD NOT be turned on, it is important to allow the plant/s to establish first, depending on the environment the plants will not need
    any more water for a further 5-10 days, sometimes longer if the plants are not in a controlled environment. Once you are happy that the plants have
    rooted, then simply turn the system on. Feeling the weight of the pots will give you an indication. Always look at the largest plants as these will need watering
    sooner.

    7. Only good clean well balanced Mineral Fertilisers should be added to the reservoirs, NEVER add organic fertilisers to the reservoir, as they have a tendency to block AQUAvalve
    nozzles and pipework. If using organic fertilisers only plain water should be used in the reservoirs, any organic feed that is needed should be poured through each pot. Slow
    release organic fertilisers can also be added to the pots at the correct ratio, generally time release organic fertiliser do not last long, so additional organic liquid teas will need to
    be poured through the top of each pot in a controlled and timely manner.

    8. Flushing from above is NOT necessary, simply supply clean plain water from the reservoir to the modules for the last 10-14 days. DO NOT, especially if you are using
    mineral fertilisers pour water through the top of the pots. Salt build up when using mineral fertilisers occurs in the top 1" (2.5cm) of the pots substrate, where it has
    no detrimental effect on the plants growth. By pouring water through the pot at the flushing stage roots may become damaged due to the toxicity of the salt build up at the
    top of the substrate. Flush ALL plants by only using plain water in the reservoir. 

    Additional Tips
    AirDomes should not be turned on straight away, allow 2-3 weeks for the plants to establish before air is blown into
    the root zone. Always ensure that warm air is blown into the root zone, Never blow cold or hot air into the root zone.

    ALWAYS RE-FILL the reservoir when there is a 1/4 of the water / solution left, NEVER let the reservoir/s run empty,
    NO WATER, NO GRAVITY, ultimately no plants will receive water.

    Always utilise the flush taps at the ends of the pipework, by opening each tap into a bucket or similar, for a minute or
    two depending on the pressure will flush the pipework and keep the pipework clean and free of sediment, this should be
    carried out once a week if using mineral fertilisers or once every two-three weeks if using plain water.

    When adding mineral fertilisers to your reservoir it is prudent to turn off the reservoir tap while you are mixing and
    re-filling. Once you have finished calibrating your reservoir with the correct amount of feed and pH down, allow the
    reservoir sediment to settle to the bottom of the reservoir for up to an hour, then re-open the tap.
    PLEASE ALWAYS REMEMBER TO TURN THE TAP BACK ON.

    Do not use fertilisers in conjunction from different suppliers, unless already tested, quite often different fertilisers when
    mixed will cause problems and not work in harmony with each other.Always check your water filters after each reservoir once every two-four weeks and clean if required. Growth Technology IONIC Hydro is the official approved nutrient for AutoPot system.

     

    Specifications of Autopot 4Pot System (Autopot Hydroponic 4 Pot System with 1 47 liters Tank)

    What's in the box:
    • 4x Single 1Pot Systems supplied by a 47 litre tank (Everythiing is contained in the tank)
    • 1x 47ltr tank, lid & 6mm top hat grommet
    • 1x 6mm golf filter
    • 4x 6mm tee
    • 2x 6mm cross connector
    • 2x 6mm inline taps
    • 4x 1Pot trays & lids
    • 4x 15 litre pots
    • 4x AQUAvalves
    • 4x root control discs
    • 4x marix discs
    General Features:
    SKU AU174HLAAATP83ANMY-22929916
    Model 4POT/PACK/1
    Size (L x W x H) 40x31x85
    Weight 10
    Warranty type No Warranty

This product was added to our catalog on Saturday 11 March, 2017.

Your IP Address is: 54.167.253.186
Template designed by Amazone.com.my. Copyright © 2017 Antara Hardware Home Centre Sdn Bhd (D&B D.U.N.S # 86-58-6574) (Co Reg# 722880-T) (GST Reg # 000646324224). Powered by Zen Cart.