Add to Cart:

Hammerite No 1 Rust Beater 250ml


  • Model: Hammerite Rust Beater 250ml
  • Shipping Weight: 0.7Kgs
  • Manufactured by: Hammerite

Kills rust, primes and undercoats all in one. Ideal for heavily rusted areas.


  • Corrosion resistant
  • Compatible with most topcoats
  • Can be applied direct to rust
  • Anti-corrosive primer for ferrous metals

Usage Guide


  • Remove all loose rust, dirt, grease and salt with Hammerite Brush Cleaner & Thinners and rinse with clean water. Allow time to dry.
  • For painted metal surfaces wash down thoroughly with diluted detergent, rinse with clean water and allow to dry.

Note: Special precautions should be taken to avoid inhalation of dust during surface preparation of pre-1960's paint surfaces over as they may contain harmful lead.


  • Ideal application temperature is 8 to 25ÂșC. Stir paint thoroughly before use.
  • By brush: apply 2 coats, allowing 2 hours between coats. Ensure corners and edges are well covered. Apply topcoat after 6 hours.
  • Please refer to back of pack for specific application instructions.

Cleaning & Storage

Remove as much paint as possible from equipment before cleaning. For best results use Hammerite Brush Cleaner & Thinners. Hammerite should be stored in a dry well ventilated area. Protect from frost and direct sunlight. DO NOT EMPTY PAINT INTO DRAINS OR WATERCOURSES

Tools Required

Brush or roller and Hammerite Brush Cleaner & Thinners

This product was added to our catalog on Sunday 02 August, 2009.

Your IP Address is:
Template designed by Copyright © 2021 Antara Hardware Home Centre Sdn Bhd (D&B D.U.N.S # 86-58-6574) (Co Reg# 722880-T) (GST Reg # 000646324224). Powered by Zen Cart.