Add to Cart:

Hammerite Kurust 90ml


  • Model: Hammerite Kurust 90ml
  • Shipping Weight: 0.3Kgs
  • Manufactured by: Hammerite

Transforms rust to a sound surface in 15 minutes. Ideal for small areas of rust, stone chips and scratches.


  • Can be topcoated after only 3 hours
  • No primer or undercoat required
  • Simple to apply - no need to rinse off
  • Converts iron oxide to stable iron complexes

Usage Guide


  • Clean surface by removing all loose paint and rust, dirt, grease and salt. Remove grease. Rinse with clean water and allow time to dry.

Note: Special precautions should be taken to avoid inhalation of dust during surface preparation of pre-1960's paint surfaces as they may contain harmful lead.


  • Shake container well and pour required amount into a plastic container.
  • By brush: apply direct to rusty area, working well into heavily pitted areas, corners and edges. Avoid coating onto painted areas.
  • Hammerite Kurust will turn blue/black when reacting with rust. If it does not change colour in 1 hour re-apply. Apply topcoat after 3 hours.
  • Do not replace unused Kurust back into the original container.

Cleaning & Storage

Clean container with water. Hammerite Kurust should be stored in a dry, well-ventilated area. Protect from frost and direct sunlight.

Tools Required

Wire brush, paint brush, plastic container and rubber gloves.

This product was added to our catalog on Monday 03 August, 2009.

Your IP Address is:
Template designed by Copyright © 2021 Antara Hardware Home Centre Sdn Bhd (D&B D.U.N.S # 86-58-6574) (Co Reg# 722880-T) (GST Reg # 000646324224). Powered by Zen Cart.